Gun is one of the strongest companions of a human being when it comes to protecting himself from anything. It is a valuable item which needs to be taken care of properly. However, handguns come with such a construction which make it highly durable and withstands high pressures and offensive environment.
Table of Contents
How to Clean a Handgun
Though guns come with durable construction, you still need to keep proper care of the handgun. Every time you shoot the trigger, there is a little explosion in the chamber, and the sediment and residue are left inside the gun. As a result, over time, it becomes problematic if regular maintenance is not taken.
Today we will discuss some steps that you can take to properly clean your handgun for a better shooting experience as well as long-term usability:
Things to consider before cleaning
If you have less experience with a gun, then you better leave it to the professional. That is because a mistake can make your favorite expensive handgun completely unusable. If you have enough experience and confidence, then you can do it easily. Here are the things that you will need while cleaning the handgun. They are available in the shop as a handgun cleaning kit as a whole package. check also How should you hold a handgun for maximum accuracy?
- Cleaning solvent
- Patch holder
- Cleaning rod
- Bore brush
- Nylon cleaning brush
- microfiber cloth
- cotton swabs
- Cleaning Mats
Unload your gun
The first thing you require to do is unload the gun. It is also the most important thing you must do before start cleaning the gun. Cleaning a loaded gun can cause deadly injuries. So start with unloading the gun. Even after unloading the gun, there may be one round ready for shooting inside the gun. So give a double check while unloading the gun. You can check whether there is an extra round or not by doing this – look through the barrel of the gun to the front. It will reveal the place where the ready-for-shoot bullet stays.
Disassemble the gun
You may clean the exterior of the gun for a better look, but the interiors require your attention much while cleaning. So you will need to disassemble the gun. If you don’t know how to disassemble the gun, then use the manual guide that comes with the gun. There you will find a proper explanation on how to disassemble the gun. Moreover, if you know how to disassemble a gun, don’t dismantle more than the recommendation of the manufacturer. Doing so may damage your gun or make it unusable.
Clean the barrel
We will start by cleaning the barrel of the gun. To do so, soak the barrel of the gun on the cleaning solvent for a while. Usually, handguns don’t have issues of copper accumulating, so you shouldn’t depend on the copper removing solvent that much. You should simply go for the general-purpose gun cleaners available in your area. Who will you do it? Put some of the solvents on a cleaning patch then assign it to the cleaning rod. Now push it gently through the end of the muzzle. It will remove the dirt.
Lubricate the barrel
The lubricant can be a great companion to remove the barrel of the gun thoroughly. Put a cotton mop on a cleaning rod. Then apply a few drops of lubricant on it and run it through the bore of the gun to put the oil inside. You may use a gun conditioner for a better result. Now apply some solvent on the brush and brush through all area of action. Then wipe the whole area with a dry and clean cloth.
After that, lubricate the moving part of the gun gently. It will help to prevent the possibility of rust. Make sure that you put a light coating instead of the heavier one. A heavy coating of lubricant can attract much debris.
Clean the rest with a luster cloth
The luster cloth is a flannel cloth that comes with silicone lubricant. The peak of using the lubricant is it will remove any debris as well as fingerprints from the gun and give it a shiny look. However, if you don’t find any cluster cloth nearby, then you may use an old t-shirt. However, make sure that it is free of dirt.
It doesn’t matter whether it is a small handgun or a large rifle; a firearm is always a huge investment. You may not want it to become malfunctioned too soon. That is why your gun requires a lot of attention and maintenance from you. Try to clean the gun after every use. It doesn’t take a lot of your time. In result, it will give you a long-term service.
A firearm helps you in many ways. Most importantly, it is a great addition to the security of you and your family. Keep it clean so that it will be available in any emergencies to serve you.